MasonrySaver Cleaner & Degreaser is a super concentrated, alkaline-based cleaner formulated to clean a variety of masonry surfaces including concrete, brick, and stone. MasonrySaver Cleaner & Degreaser penetrates deeply into the substrate to remove petroleum-based contaminants like oils, dirt, grime, and even efflorescence. It is an environmentally safe, biodegradable alternative to other harsher products, such as phosphoric acid or acid-based cleaners.
MasonrySaver Cleaner & Degreaser cleans these surfaces: loading docks, garage floors, driveways, parking garages, industrial floors, machine shops, and auto repair faciilities.
Limitations: DO NOT USE ON COMPOSITE FLOORS, WATER-BASED PAINTED SURFACES, OR ALUMINUM.
- Deep penetration
- Will not harm drains, plants, or environment
- Pleasant odor
- Industrial floors
- Does not leave residue
Dilution Ratios: Use ten parts water to one part MasonrySaver Cleaner & Degreaser to clean:
- Counter tops
- Tile floors
- Painted walls
- Storm doors
- Garbage cans
Full Strength: Use MasonrySaver Cleaner & Degreaser to clean:
- Floor wax
- Smoke film
- Finger prints
- Heel marks
For general cleaning of dirt, grime, spots, and stains, simply spray MasonrySaver Cleaner & Degreaser on the area to be cleaned, wait a minute or two and wipe off.
For oil stains on concrete floors and driveways, do not dilute the product or pre-wet the surface. Apply MasonrySaver Cleaner & Degreaser at full strength by pouring or spraying on the areas to be cleaned. Work the cleaner into the stained area using a stiff broom or nylon brush. Allow the product to work for approximately 20-30 minutes before rinsing. Rinse with clean water. Rinsing with high-pressure or heated water will expedite cleaning. For severe stains, multiple coats of cleaner may be needed.
Packaging: Available in 32-oz. spray bottles and one-gallon recyclable plastic containers.
Shelf Life: 36 months in original unopened container
Freeze Thaw Stability: Protect from freezing