Click to enlarge
Previous product
DEFY Interior Clear Wood Finish
Back to products
Next product
CHIMNEYRX Trowelable Crown Repair

MasonrySaver Water Repellent for Split Face Block

MasonrySaver® Water Repellent for Split Face Block is a waterborne block sealer that causes water to shed, and significantly reduces water penetration into a wall system. It is specifically designed for lightweight, split face and fluted block.

Category:
Description

MasonrySaver® Water Repellent for Split Face Block is a waterborne block sealer that causes water to shed, and significantly reduces water penetration into a wall system. It is specifically designed for lightweight, split face and fluted block.

This product is a silane/siloxane blend with acrylic elastomers that penetrate small pores and reduces the size of larger ones. This combination gives MasonrySaver® Water Repellent for Split Face Block the advantages of both a film forming coating and a hydrophobic silane/siloxane water repellent.

UV Stable

This UV stable product allows for penetration of up to 3/4 of an inch or more depending on porosity of the concrete masonry unit. This creates a deep, long-lasting waterproof zone within the surface while producing only a minimal glossy look.

Recommended Uses

This product is recommended for use on all porous, vertical, above grade concrete masonry units including:

  • Smooth Block
  • Split-faced block
  • Burnished Block
  • Fluted Block
  • Ribbed Block
  • Concrete
  • Brick

Natural substrate color and surface textures are only minimally affected, adding only a slight sheen and darkening. It can be used on denser clay brick where some gloss and sheen are desirable.

MasonrySaver® Water Repellent for Split Face Block can be painted over with most quality oil base paints that are recommended for exterior masonry surfaces. Coverage rates will range from 40-125 square feet per gallon depending on surface porosity. Product dries to the touch in 30 minutes to 2 hours depending on temperature and humidity. Testing is recommended before treating any surface to ensure desired results.

This product is a silane/siloxane blend with acrylic elastomers that penetrate small pores and reduces the size of larger ones. This combination gives MasonrySaver® Water Repellent for Split Face Block the advantages of both a film forming coating and a hydrophobic silane/siloxane water repellent.

UV Stable
This UV stable product allows for penetration of up to 3/4 of an inch or more depending on porosity of the concrete masonry unit. This creates a deep, long-lasting waterproof zone within the surface while producing only a minimal glossy look.

Recommended Uses
This product is recommended for use on all porous, vertical, above grade concrete masonry units including:

  • Smooth Block
  • Split-faced block
  • Burnished Block
  • Fluted Block
  • Ribbed Block
  • Concrete
  • Brick

Natural substrate color and surface textures are only minimally affected, adding only a slight sheen and darkening. It can be used on denser clay brick where some gloss and sheen are desirable.

MasonrySaver® Water Repellent for Split Face Block can be painted over with most quality oil base paints that are recommended for exterior masonry surfaces. Coverage rates will range from 40-125 square feet per gallon depending on surface porosity. Product dries to the touch in 30 minutes to 2 hours depending on temperature and humidity. Testing is recommended before treating any surface to ensure desired results.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “MasonrySaver Water Repellent for Split Face Block”

Your email address will not be published. Required fields are marked *

Related products

Close

MasonrySaver #25 Floor Finish

#25 Floor Finish is a highly durable, water-based acrylic polymer interior floor finish that provides a rich, gloss finish that resists dirt and floor scuffing.
Quick view
Close

MasonrySaver Safer Brick & Masonry Cleaner

MasonrySaver Safer Brick & Masonry Cleaner is a safety breakthrough in acid cleaning for commercial and home use. Use for any tough acid cleaning or etching job where you would normally use muriatic acid. The chemical composition of Safer Masonry Cleaner is the same as muriatic acid with proprietary additives. The patented chemistry virtually eliminates the dangerous, toxic fumes and potential acid burns normally associated with muriatic acid.
Quick view
Close

MasonrySaver Decorative Concrete Sealer

Designed for use on both interior and exterior concrete, MasonrySaver Decorative Concrete Sealer is suitable for use on a variety of surfaces where a durable gloss finish is desired, including concrete patios, driveways, sidewalks, and even garage floors.
Quick view
Close

MasonrySaver No Rinse Concrete Etch

Etch concrete or masonry surfaces – No need to rinse prior to using a stain or sealer. No-Rinse Concrete Etch is a hydrofluoric acid-etching material designed for etching concrete or other masonry surfaces prior to coating or sealing. A thin film of Etch will etch any silica-containing surface in as little as 15 seconds.
Quick view
Close

MasonrySaver Paver Sealer

MasonrySaver Paver Sealer is designed to protect and beautify: clay brick, clay paver stones, cement paver stones and natural stone. It's a durable, water-based, clear sealer. It will give pavers a slight satin sheen, or wet-look.
Quick view
Close

MasonrySaver All Purpose Heavy Duty Water Repellent

MasonrySaver All-Purpose Heavy Duty Water Repellent is the “work-horse” product of the MasonrySaver line. This high-performance, VOC-compliant product is a perfect fit for sealing and protecting brick walls, driveways, sidewalks and patios.
Quick view
Close

MasonrySaver Acrylic Waterproofing Sealer

MasonrySaver Acrylic Waterproofing Sealer is a clear, water-based, non-yellowing, acrylic interior brick sealer formulated for use on above grade interior brick walls or exterior non-porous substrates, such as brick, stone, smooth masonry, and other moderately dense surfaces.
Quick view
Close

MasonrySaver Water Repellent for Brick

MasonrySaver® Water Repellent for Brick is a modified siloxane based product designed to penetrate deeply in to most masonry and concrete pores. Unlike acrylics, silicones, and other waterproofing sealers that remain on the surface and trap water vapors, this masonry waterproofer allows deep penetration of its active ingredient of up to 1/4 inch or more.
Quick view