For Proper Usage: Refer to “Tie Coat Mixing” in the Installation and Maintenance Instructions Manual for HeatShield Cerfractory Flue Sealant
For Tie Coating: Add one 1/2 cup (4 oz.) of “Tie Coat Accelerator” per 50 lb bucket of HeatShield or 1/4 cup (2 oz.) per one half bucket of mixed HeatShield Cerfractory Flue Sealant. Mix well with paddle mixer, add necessary amount of water to make a “soupy” mixture. Contents will make approximately twenty 50 lb. buckets of HeatShield Tie Coat mix.
FIRST AID: Eye Contact: Immediately flush eyes thoroughly with water for at least 15 minutes. Remove contact lenses if present and easy to do. Obtain medical attention if pain, blinking, tears, or redness persist. Skin Contact: Wash with plenty of soap and water. Wash contaminated clothing before reuse. If skin irritation occurs, get medical advice/attention. Inhalation: Remove to fresh air and keep at rest in a position comfortable for breathing. In case of breathing difficulties, administer oxygen by trained personnel. In all cases of doubt, seek medical attention. If Swallowed: Rinse the mouth with plenty of water (only if the person is conscious) and obtain immediate medical attention. Drink two glasses of water.