This product is a non-toxic, environmentally safe, spray-on cleaner that safely removes carbon and soot build-up from gas logs. Works instantly! Will not harm gas logs. Note: Do not use on white log sets, including birch! Not effective on lightweight fiber logs.
DIRECTIONS FOR USE
Ignite the gas logs and burn for approximately 30 minutes to ensure logs are hot. Shut off gas to logs. Spray ACS Gas Log Carbon & Soot Remover on logs while they are still hot. Carbon and soot will quickly disperse. Repeat as needed.
Note: This product is only effective when sprayed on HOT logs.
Cleaning Spills: Remove stains on hard surfaces with hydrogen peroxide mixed with a small amount of white vinegar. Apply to stains and blot up.
VOC Content: <70 g/L
CAUTION: Keep out of reach of children. Eye irritant. Avoid contact with eyes, mucous membranes & prolonged contact with skin.
FIRST AID: In case of eye contact, flush thoroughly with water for fifteen minutes and get prompt medical attention. In case of skin contact wash as soon as possible with soap and water. In case of ingestion, drink plenty of water, and contact a physician immediately. For additional information, consult the Product Data Sheet and SDS for this product available at www.chimneysaver.com.